Control Systems

Adjusting the Temperature

The initial temperature that's displayed is the current temperature in your Hot Tub.

To set your desired temperature, use the UP or DOWN arrows to change - going through 1/2 degree segments.

Once you have selected, remove your finger and the temperature will automatically lock in your selection.

The initial temperature that's displayed is the current temperature in your Hot Tub.

To flip your display, enter into your controls settings by pressing WARM and then LIGHT.

Press the LIGHT button once which will lock in your selection.

Flipping the Screen

Change the High/Low Range

If your Hot Tub isn't heating to your desired Temperature, this could be because the Range is on LOW.

To change the range to HIGH, enter into your control settings by pressing WARM and then LIGHT.

The "RANGE" text will begin to flash. To set the range to HIGH, press the UP arrow to make the arrow point upwards on the display.

Once you have selected, press the LIGHT button once which will lock in your selection.

Ready & Rest Mode

The initial temperature that's displayed is the current temperature in your Hot Tub.

To switch between READY and REST modes, enter into your control settings by pressing WARM and then LIGHT. 

Press the LIGHT button until "MODE" is displayed with either "READY" or "REST" flashing.

Once you have selected, press the LIGHT button once which will lock in your selection.

Setting the Time

To set the time on your hot tub, enter into your control settings by pressing WARM and then LIGHT.

Press the LIGHT button enough times until you see "SET - TIME" shown on the screen.

To set the hours, press the WARM button once and then alter by using the UP and DOWN arrows.

Once you have selected, press the LIGHT button which will lock in your selection.

To connect your Bluetooth to your device, start by selecting both switches ON.

Once the BT and Speakers is switched on, search for Bluetooth devices and look for "BlueAudio". You'll hear a beep once connected.

If a password is potentially required, use "0000" to connect.

Now to play your tunes!

Connect Bluetooth